Share on LinkedInShare on LinkedIn

ARTICLE · 19 NOVEMBER 2026

Making Sound PFAS Treatment Decisions

A recent proposal in Chatham illustrates the choices. According to an October 28 report in The Cape Cod Chronicle, officials considered two approaches for treating PFAS at a pair of municipal wells: a roughly $16.2 million plant that would also treat iron and manganese and allow year-round operation, or approximately $2.5 million in outdoor granular activated carbon treatment equipment for peak summer use.

United StatesEnvironment

For a Massachusetts water utility, deciding how to treat PFAS in drinking water should be more than an exercise in comparing construction estimates. The decision should bring together water quality, dependable supply, long-term operating costs, and the burden on customers. The right question is not simply, “Which project costs less?” It is, “Which investment will deliver the treatment and capacity this community needs, at a sustainable cost?”

A recent proposal in Chatham illustrates the choices. According to an October 28 report in The Cape Cod Chronicle, officials considered two approaches for treating PFAS at a pair of municipal wells: a roughly $16.2 million plant that would also treat iron and manganese and allow year-round operation, or approximately $2.5 million in outdoor granular activated carbon treatment equipment for peak summer use. The less expensive option would require one or both wells to shut down during the off-season and would not treat iron and manganese.

We operate a free-to-view policy, asking only that you register in order to read all of our content. Please login or register to view the rest of this article.

The content of this article is intended to provide a general guide to the subject matter. Specialist advice should be sought about your specific circumstances.

See more popular content from